Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Jack_23

Member
Registered:
Posts: 32
Reply with quote  #1 
I have to DIY a fluid delivery for reward. The output voltage from BNC-2090A is 5V. I will use solenoid "Parker 003-0111-900 " to give fluid, whose rated voltage is 24 DV. So I am not sure whether I buy a power source of 24 DV 5A , or a power source of 24 DV 10A? How can help me. Thank you very much.
0
Jaewon

Administrator
Registered:
Posts: 730
Reply with quote  #2 
This is a little dangerous thing to do, if you are not familiar with this kind of stuff (and I guess you are not since you cannot tell which power supply you need to buy). According to the manufacturer's spec, that solenoid valve draws just ~0.2A, so it doesn't matter which one you buy, if you use only one valve or two. But you need to keep BNC-2090A isolated from the power supply circuit so that 24V does not flow to the DAQ board and the computer.
0
Jack_23

Member
Registered:
Posts: 32
Reply with quote  #3 
Thank you for the warning. 
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.